PropOne™ Underwater Light Coating (ULC) 70mL

Taxes and shipping calculated at checkout. For more information, please see our terms of service page.

$ 67.08

Qty

Are you a reseller or retailer? – Click Here
Are you looking for bulk or contract pricing? – Click Here

Description

One pack, one coat.

Bright, clean and simple. 

  • Transparent coating specifically designed for your underwater lights
  • Minimal maintenance
  • Simple application

Read more

PropOne ULC is a an optically clear foul release coating designed for application to glass and polyamide underwater light lenses. It can also be coated onto surrounding brass and plastic/composite light fitting surroundings.

The ULC is a non-biocidal, low surface energy coating which prevents organisms strongly adhering to the light lens. Any growth can be easily dislodged by cleaning with a soft sponge or wiping with a gloved hand.

As with all foul release coatings, when not in use, the surface will slowly become colonised by encrusting organisms. The removal of the fouling organisms is purely a mechanical effect.

The ULC does not prevent marine growth by chemically poisoning the environment

Coverage

Application guide

Additional information

Weight 1.01 kg

Coverage

Time to immerse Size Recommended
surfaces
Coverage (approximate)
At 10°C (50°F): 16 hours, at
20°C (68°F): 12 hours.
70mL Glass and polyamide underwater light lenses.
Surrounding brass and plastic/composite light fitting surrounds.
70mL tin is sufficient to coat roughly
0.7 sqm of underwater light lens area

Application

Surface Preparation

Remove foreign matter by one or a combination of the following:

  1. Brush with stiff fibre brushes.
  2. If heavy shell fouling is present on light surface, clean with Crystilium Hull and Waterline Cleaner.
  3. Grease and oil can be removed with a sponge using a 1:50 dilution of Crystilium Boat Wash in water.
  4. Finally wash down with high pressure fresh water hose and allow to dry completely.
  5. Wipe with a clean cloth soaked in acetone.

Inspect all cleaned surfaces for any contaminants.

ULC application

  1. Apply the ULC using a brand new soft clean brush.
  2. Apply generously, working from the centre to the edges.
  3. Cover all areas of the light lens and any surrounding brass or plastic/composite fitting working systematically to cover all of each lens before moving to the next lens. Apply one coat only.
  4. Check for runs and drips, these can be brushed out for up to five minutes before the coating begins to cure.

ULC Technical Data Sheet

Kits

Proven performance, worldwide. PropOne is a non-biocidal foul release coating that will protect your underwater metals. Increase speed and lower your fuel use!

Cleaners & Removers

Get the best out of your PropOne application by properly preparing metal surfaces and removing old coatings and contamination you cannot see.

1
    1
    Your Cart
    Crystilium Cleaning Kit
    1 X $ 68.09 = $ 68.09 (incl. tax)