Crystilium FAQs

They can be thought of as a coating of impermeable “liquid glass” that cures and seals surfaces protecting them from the exterior environment. They are in the family of ceramic coatings and provide a highly transparent, glossy, tough layer that ensure long lasting gloss, excellent stain protection and an easy clean.

Crystilium Clear Coat Lite

Our lightest protective layer which is ideal for surfaces above the waterline such as superstructures. This high performance, marine grade coating ensures easy to clean, stain free surfaces for 1-2 years. Simply wipe on and wipe off.

Crystilium Clear Coat Pro

Highly transparent, thin protective layer which protects marine topcoat paints and gelcoat. It has been developed to be a professional use only, cost effective alternative for repainting that ensures long-lasting gloss and excellent protection against stains on high wear areas such as hulls.

A high-performance range of marine topside and hull cleaning products:

Hull and Waterline Cleaner

Removes stubborn stains such as discolouration, water stains, scuff marks and rust quickly and without hard scrubbing from fibreglass, aluminium, stainless, chrome and steel.

Boat Wash Concentrate

High strength, pH neutral concentrate that gently lifts debris and lubricates while you clean, reducing swirl marks.

Marine Eraser

No.1 Mark and stain remover tool for your boat! An extra large sponge specifically designed for boats that will quickly and easily remove marks and stains. No detergent or cleaner needed, just add water.

Both Crystilium Clear Coat Pro and Lite can be applied on most surfaces:

  • Marine topside paint
  • Polyurethanes
  • Gelcoat
  • Acrylics
  • Epoxies
  • Powder coatings
  • All marine metals
  • Nylon
  • Polycarbonate
  • Perspex
  • Vinyl

Not suitable for use on untreated, unsealed porous surfaces such as cinder blocks, brick, concrete, fibreboard or cement.

Clear Coat Pro: 2+ Years

Clear Coat Lite: 1 – 2 Years

Using Crystilium Clear Coat Dissolver, this is a safe and easy process with instructions in the technical data sheet linked here.

Crystilium Clear Coat Pro: 75 m2 (807 ft2) per litre*

Crystilium Clear Coat Lite: 75 m2 (807 ft2) per litre*

*This may be reduced to below 60 m2/L on more absorbent matt and weathered surfaces.

You can buy from our online store or visit your local distributor. Contact us if you need any help!

For best results and performance:

Unopened bottles, 1 year if stored at 20°C (68°F).

  • Opened bottles, 2 months if immediately resealed after use and stored at 20°C (68°F).
  • Opened bottles, 4 months if immediately resealed after use and stored in a refrigerator 4°C (39°F).

Do not pour used material back into bottle, leave used product open to cure overnight in a dry, well-ventilated area.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop